Universal Live Timing Box Rev 2.0 User manual
16.3 Setting: DS bridge sector sensor, dead strip sector sensor
I
n order that the
Track Interface
interprets both DS bridge and dead strip as sector sensors, the
double switch (5) must be set as shown in figure 35.
In particular, both switches must be positioned in position 0. When the
car passes under the bridge, the LED (3) or (4) (according to the lane
the car finds itself in) flashes once, and the same thing happens when
it passes on the dead strip.
16.4 Not allowed Setting
In figure 36 the last possible switch combination for sensor setting is
shown. This combination would tell the
Track Interface
to consider
both DS bridge and dead strip as lap counter sensors, but this is
impossible. The
Track Interface
signals this wrong combination by
making LED (3) and (4) flash until the user changes the setting.
Moreover, during this situation the
Track Interface
does not carry out
any function.
40
Figure 35:
DS bridge sector
sensor, dead strip sector
sensor.
Figure 36: not allowed setting.
