2
TOOLS REQUIRED FOR INSTALLATION
• 2.5 mm hex allen wrench
• 5/8” open end wrench for female end for U.S. flex hose fittings
• Tape Measure
• Level
• #2 Philips Screwdriver
• Carpenters Square
• Drill
• Utility Knife
• Pipe Nipples
• Pipe Elbows
• Teflon Tape (NO PIPE DOPE!)
PRIOR TO INSTALLATION
Prior to installing the Sloan BASYS
™
Series Faucets, install the items listed
below. Also, refer to rough-in illustrations.
IMPORTANT:
• ALL PLUMBING SHOULD BE INSTALLED IN ACCORDANCE WITH APPLI-
CABLE CODES AND REGULATIONS.
• FLUSH ALL WATER LINES PRIOR TO MAKING
CONNECTIONS.
• KEEP THREAD SEALANT OUT OF YOUR WATERWAY TO PREVENT COM-
PONENT PART DAMAGE! DO NOT USE ANY SEALANT ON COMPRESSION
FITTINGS.
• DO NOT REMOVE THE SENSOR LABEL UNTIL AFTER WATER SUPPLY IS
TURNED ON.
Wall Plate
The BASYS
™
Wall Faucet can be installed with or without supplied wall
plate.
FAUCET ROUGH-IN
EFX-8XX.X0X.10X0
† EFX Faucets are available with a 0.5 gpm
(1.9 Lpm) multi-laminar spray, 1.5 gpm
(5.7 Lpm) aerated stream, and 1.5 gpm
(5.7 Lpm) laminar stream.
8.23”
(209.1 mm)
9.5”
(244 mm)
2” (51 mm)
42°
3.13” (79.5 mm)
2.43” (61.8 mm)
3” (76.4 mm)
1.67” (42.4 mm)
