9
REPLACING THE SOLENOID/FILTER (CONTINUED)
E
Rotate solenoid caddy clockwise to
align with arrow, locking the unit
and opening water path.
F
Slide on crown and secure in 2 places.
REPLACE SPRAY INSERT
B
Retrieve spray removal tool located near the spray insert.
C
Insert spray removal tool into spray slot by sliding hook end of key between
faucet spout and insert. Pull insert out of faucet once hooked.
D
Install new insert.
NOTE: If
changing to
a different
flow rate
solenoid caddy
must also be
changed.
E
Return spray removal tool to storage location.
NOTE: This can only be done once spray head is installed. This will
lock the spray head in place.
NOTE: If spray head is inserted incorrectly – key will not lock in
properly. Turn
faucet on to
push insert out
and re-install.
F
Slide on crown and secure.
NOTE: TURNING OFF WATER IS NOT NECESSARY, DUE TO INTEGRATED AUTOMATIC STOP VALVE.
UNLOCK
LOCK
LOCK
A
Remove crown by loosening hex screw located on
underside of spout and slide crown down and
lift off.
NOTE: Screw is captive within
faucet body.
