Skyworth SKW-T21, Руководство пользователя

Страница: 9 / 30

1.4 Accessories
„ „
Installation instructions
„ „
1 remote control unit
„ „
2x batteries (AAA type)
„ „
1 HDMI cable
WARNING:
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used (e.g. NiMH), we
recommend using types with low self-discharge to ensure long time
operation of your remote control.
1.5 Usage of external USB devices
„ „
It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible
to USB 2.0 specifications, recording, playback and other multimedia functions of the receiver
might not work properly.*
„ „
To ensure best performance of your USB storage device please format it via your receiver
(through the menu “
Multimedia ”) to FAT32 system. Other file systems are not all supported by
the receiver. However, it is possible to use already NTFS formatted disks.
„ „
SKYWORTH cannot guarantee compatibility with all types of USB storage devices.
„ „
If you are going to use external USB HDDs (Hard Disk Drives), please consider that power
specifications may exceed the supported output of your receiver (max.5 V/800 mA). If so, please
connect your USB HDD to an according external power adapter.
„ „
Playback of files cannot be guaranteed although extensions are listed, as it depends on codec,
data bit rate and resolution used (all MPEG codec formats are supported).
„ „
It is advised not to store important information on USB storage devices used with the receiver.
Always make backups of data on your USB storage device before using it with this receiver.
SKYWORTH will not take responsibility for any loss of information or circumstances caused by
loss of information.
*This user manual describes the full functionality including the recording function and may not be applicable if the
software for recording via USB has not yet been installed (available in our web shop: www.strong.tv).
2.0 YOUR RECEIVER
2.1 DEFAULT PIN: 0000
2.2 Front Panel
Fig. 1
1.
IR Sensor
Receives commands from the remote control
2.
LED Display
Shows channel number and time in standby
5