Skyworth SKW-T21, Руководство пользователя

Страница: 28 / 30

WARNING:
Old channel list and favourites will be overwritten.
8.0 TROUBLESHOOTING
There may be various reasons for abnormal operation of the receiver. Check the receiver according to
the procedures shown below. If the receiver does not work properly after checking it, please contact
your dealer or the local Service Hotline or send email to our Support via www.strong.tv. Do NOT try to
open or disassemble the receiver. It may cause a dangerous situation and warranty will be void.
Problem Possible cause What to do
LED indicator is not lit The mains lead is unplugged or
power switch on the back panel
is OFF Check the mains plug and the
power switch on the back panel
No signal found The antenna is disconnected
The antenna is damaged/
misaligned
Out of digital signal area
Active antenna requires to switch
ON the antenna power/external
power Check the lead of the antenna
Check the antenna
Check with your dealer
Switch the antenna power of the
receiver ON/connect external
power
No picture or sound on
TV or amplifier HDMI or SCART is not selected on
your TV or amplifier or the unit is
set to higher resolution as the TV
supports.
TV/amplifier is not connected to
mains or switched off Switch to correct TV/amplifier
input
Select lower resolution on receiver
Switch TV/amplifier on.
Check if S/PDIF connection is used.
Scrambled channel
message Channel is scrambled Check if you have the rights to
watch this channel
No response to the
remote control The receiver is off
The remote control is not aimed
correctly
The front panel is obstructed
The batteries of the remote
control are exhausted Plug in the receiver, turn on the
plug and flick the power switch
ON.
Aim the remote control at the
front panel
Avoid obstructions
Replace the batteries of the
remote control
Forgotten Parental
Control PIN code
Forgotten channel
lock code Default PIN is
0000
Contact your local Service Hotline
or send an email to our Support
via www.strong.tv
24