Skyworth SKW-T21, Руководство пользователя

Страница: 18 / 30

When in doubt, use the DVB-T+T2 setting.
If you use an active antenna (with built-in amplifier), then switch the Antenna Power to On . If you use a
passive antenna (without built-in amplifier), then select
Off
.
Highlight Search and press
OK
to start scanning. New found channels will be added to the channel
list.
7.1.2 Auto Search
This menu allows you to search for channels from all available Frequencies or Channel numbers . Be
aware that all previous installed channels and favourite list(s) will be deleted. The new found channels
will be installed in the channel list and afterwards you can create a new favourite list if you like.
Select
Scan mode , and select between Free which will only install Free-to-Air channels or All . Highlight
Search and press
OK
to start scanning.
7.1.3 Information
This submenu shows receiver specific information such as hardware and software version. It also
displays technical information from the currently selected channel and signal strength and quality.
Please have the
Information
screen on hand when you call our hotline. The person who answers your
call might ask for the information given in this screen.
7.1.4 Load Factory Settings
This option allows you to reset the receiver back to the factory settings, which also clears all stored
channels.
Use
pq
to select Load Factory Settings in the Installation menu and press
OK
. You are asked to
enter your PIN code. Enter the correct PIN code using the 0~9 buttons. (DEFAULT PIN: 0000) . A
confirmation window is displayed. Select OK to load factory settings. Select Cancel to cancel. Press 
to leave.
WARNING:
By resetting your receiver to factory default, all your settings and stored
channels will be permanently deleted. Please use this option with care.
7.1.5 Freenet Menu
Read technical data about your subscription(s) and find messages from your provider. Moreover, you
can check the rights to watch certain programmes. A Software update is signalled here too. Follow
the instructions on screen. Some data given has no immediate meaning to a client, but is useful to
a service centre or provider itself. This menu gives access to the following submenus which can be
opened for detailed information about these items:
Service Status , Loader Status , Product Status , Client
Status and Mailbox .
7.1.5.1 Mailbox
This menu allows access to provider mails. It is used for sending important information from
broadcaster/content provider to you. If you receive a mail you will get this message directly displayed
14