Skyworth SKW-T21, Руководство пользователя

Страница: 25 / 30

Pictures:
pq
: Enter the folder with picture files. Use
pq
to select a picture. If the format
is supported it shows the picture in the small picture-in-picture screen. Press
OK
to watch it in full screen mode.
RED
Option: Before the playback of a picture in full screen, you can setup a slideshow/
diashow. Press the
RED
button Option to enter the sub option menu Slide
change Time . Select time of the slide show or switch this function off. After
you select a time, press OK and show starts to play. Press the

button to
stop.
*Playback of files cannot be guaranteed although extensions are listed, as it depends on codec, data bit rate and
resolution used (all MPEG codec formats are supported).
7.4.2 Record Setup*
This menu is only accessible if you connect a USB storage device. Here you can setup Timeshift and
recording.
The following settings are available:
Timeshift Status : Choose between Enable to activate the Timeshift function or Disable to
switch it off. This function will also automatically be set to Enable if you press
2
on the remote and have USB device connected.
Timeshift Step : Select the time size step in minutes and seconds which you like to make by
using
tu
during navigation in Timeshift modes. Use the
0~9
buttons to
enter the time.
Timeshift Duration : Select the maximal time (size) which is reserved for the Timeshift function.
Use the
0~9
buttons to enter the duration.
Record Duration : Select the default maximum time for recordings that can be started with the
4
button. Use the
0~9
buttons to enter the duration.
Start Record earlier : If you want to start the recording, set under timer from EPG some minutes
earlier than the time obtained from the programme guide.
End Record later : If you want to stop the recording, set under timer from EPG some minutes
later as time obtained from the programme guide.
REC Icon : If you start a recording, an icon will be shown in the left upper corner of your
TV screen with the text “REC”. Default is set to
On . Select 5 Seconds or 10
Seconds to let the icon disappear after the selected time.
*This user manual describes the full functionality including the recording function and may not be applicable if the
software for recording via USB has not yet been installed (available in our web shop: www.strong.tv).
7.4.3 Storage Device Setup*
This option shows relevant information about the connected USB device. In this menu, you can also
format your USB storage device and safely remove.
Select
Storage Device Setup in the Multimedia menu and press
OK
to enter.
Now you will see all details as free and used space sizes and used file system.
Press the
RED
Safely Remove button and press
OK
to safely disconnect the USB device. The receiver
will display a message indicating that you can now safely remove your storage device from the
receiver. Press the
BLUE Format USB Device button to format the connected USB device.
21