7.3.3 General Settings
This menu allows you to manage the basic system settings of your receiver.
It consists of the following sub-menus:
Standby Mode
,
Auto Standby
and
Auto Channel Update
.
7.3.3.1 Standby Mode
You can select Active, Passive or Passive mode. In Passive mode the unit will start up within
about 3 seconds from standby mode. Set to Active mode, it will take about 35 seconds. Per default
the Passive combination is set so a short press on the
q
button of your remote will set the
unit to Passive standby; a long press (1 second) on
q
will set the unit to Active standby mode. It is
recommended to set your receiver to Passive Standby mode every now and then, to refresh all data
and keep your unit up-to-date. In active standby mode, the power consumption is less than 1 Watt, in
passive, less than 6 Watt.
7.3.3.2 Auto Standby
Auto Standby is a new feature that helps you reducing power consumption.
Press
pq
to highlight the menu
Auto Standby
and press
OK
advance.
When set to between
1 to 6 Hours
, the receiver will switch to standby if it doesn’t receive any
commands of the remote control during this time. Set
Auto Standby
to
Off
to deactivate the
automatic standby function.
7.3.3.3 Auto Channel Update
If this function is switched
On
, the unit will check if new channels are available before your receiver is
switching to standby. When switching on the next time, you will be informed if new channels are on
air and prompted to start an auto scan. This function allows you to keep the channel list up-to-date
always. If you select
Off
, the automatic channel update function is deactivated and you’ll be enabled
to use the
Delete
function in the
TV Manager
.
7.3.3.4 Logical Channel Numbering
This receiver supports Logical Channel Numbering (LCN). This means that the channel numbers
are operator defined and automatically sorted into the main channel list. Sorting in the main list is
therefore not possible. In this case the
Move
function is marked grey and cannot be selected. The
default setting for this function is
Off
and you are free to sort the channels in the main channel list.
As soon as the broadcaster supports this function you can activate it by setting it from
Off
to
On
.
In this case the receiver will delete all current channels and favourite lists and start a fully new scan
process. Please confirm the displayed message with
OK
to proceed.
7.3.4 Parental Control
This menu allows you to protect the installation menu and/or channels with a PIN code. You can also
create a new PIN code. Use
pq
to select
Parental Control
from the
Settings
menu and press
OK
to
proceed. You will be asked to enter your PIN code.
(DEFAULT PIN: 0000)
Menu Lock
:
Locks the installation menu. You can set the
Menu Lock
to
On
or
Off
.
18
Содержание SKW-T21
Страница 1: ...Bedienungsanleitung User Manual Empf nger f r hochaufl sendes Antennenfernsehen SKW T21...
Страница 2: ......
Страница 3: ......
