Skyworth SKW-T20, Руководство пользователя

Страница: 8 / 24

Tips
Indicates any other additional important or helpful information.
menu
Represents a button on the remote control or the receiver.
(bold characters)
Move to Represents a menu item within a window.
(Italic characters)
1.4 accessories
„ „
Installation instructions
„ „
1 remote control unit
„ „
2x batteries (AAA type)
„ „
1 HDMI cable
„ „
Power adapter12 V DC, 1.5 A
WaRning:
The batteries should not be recharged, disassembled, electrically short-
circuited, be mixed or used with other types of batteries. If rechargeable
accumulators instead of batteries are going to be used (e.g. NiMH), we
recommend using types with low self-discharge to ensure long time
operation of your remote control.
1.5 usage of external usb devices
„ „
It is recommended to use USB 2.0 storage devices or higher. If your device is not compatible
to USB 2.0 specifications, playback and other multimedia functions of the receiver might not
work properly.
„ „
To ensure best performance of your USB storage device please format it via your receiver
(through the menu “
Multimedia ”) to FAT32 system. Other file systems are not all supported by
the receiver. However, it is possible to use already NTFS formatted disks.
„ „
SKYWORTH cannot guarantee compatibility with all types of USB storage devices.
„ „
If you are going to use external USB HDDs (Hard Disk Drives), please consider that power
specifications may exceed the supported output of your receiver (max.5 V/800 mA). If so,
please connect your USB HDD to an according external power adapter.
„ „
Playback of files cannot be guaranteed although extensions are listed, as it depends on
codec, data bit rate and resolution used (all MPEG codec formats are supported).
„ „
It is advised not to store important information on USB storage devices used with the
receiver. Always make backups of data on your USB storage device before using it with this
receiver. SKYWORTH will not take responsibility for any loss of information or circumstances
caused by loss of information.
2.0 YOuR ReceiveR
2.1 defauLT pin: 0000
2.2 front panel
Fig. 1
1.
q
Switches the receiver ON or into Standby
2. pq Switches to the previous/next programme
3.
t u
Decreases/increases the volume level.
4.
OK
Opens the current channel list in menu: for confirmation
5.
menu
Opens the main menu. In a menu you will get one step back.
6.
eXiT
Exits from the menu or sub-menu.
7.
Led display
Shows channel number and time in standby
8.
iR sensor
Receives commands from the remote control
4