SkyWave IDP-680 страница 33 Скачать руководство пользователя | Manualshive

Страница: 33 / 64

background image

IDP 600 Terminal Series - Hardware Guide

© SkyWave Proprietary 23 T200, Version 02

4

Installation

The following section contains SkyWave's recommended installation guidelines for the
Solution Provider (SP). These recommendations should be incorporated into installation
guidelines for end users.

CAUTION

The installer is responsible for injury or damages as a result of
the installation, except any such injury or damages arising solely
from a defective SkyWave product. In addition to the liability
imposed upon the installer on the account of personal injury,
bodily injury, including death, or property damage suffered as a
result of the installer’s installation of the product, the installer
assumes the obligation to save harmless SkyWave, including its
agents, employees and assigns, and to indemnify SkyWave,
including its agents, employees and assigns, from every expense,
liability or payment arising out of such wrongful or negligent act
or omission, including legal fees. The installer also agrees to
hold harmless SkyWave, including its agents, employees and
assigns, from any wrongful or negligent act or omission
committed by any subcontractor or other person employed by or
under the supervision of the installer for any purpose, and to
indemnify SkyWave, including its agents, employees and assigns,
from every expense, liability or payment arising out of such
wrongful or negligent act or omission.

The terminal uses very low power during transmission and therefore presents no radiation
hazard during normal use, installation, testing, and troubleshooting.

4.1

Getting Started

Getting the terminals ready for operation requires doing the following:

1.

Prepare for the installation (Section 4.2)

2.

Identify the fuse panel location (Section 4.3)

3.

Determine a suitable mounting location (Section 4.4)

4.

Route the main cable (Section 4.5)

5.

Mount the terminal (Section 4.6)

6.

Protect the cables and cable connectors (Section 4.7)

7.

Connect to power (Section 4.8)

8.

Register the terminal (Section 4.9)

4.2

Prepare for the Installation

Check that you have the items and tools listed below before installing the terminal.

«
...
31
32
33
34
35
...
»

Содержание IDP-680

































































Отзывы:

Нет отзывов

Похожие инструкции для IDP-680

Бренд: NCR Страницы: 153

Бренд: NCR Страницы: 44

Бренд: NCR Страницы: 112

Бренд: NCR Страницы: 92

Бренд: Ocom Страницы: 30

Бренд: Vectron Страницы: 77

Бренд: VeriFone Страницы: 6

Бренд: AddSecure Страницы: 62

Бренд: Samson Страницы: 70

Бренд: Mercury Страницы: 82

Бренд: Datavan Страницы: 2

Бренд: ELTEX Страницы: 334

Бренд: PAX Страницы: 56

Бренд: Pax Technology Страницы: 151

Бренд: Omron Страницы: 333

Бренд: FlexiForce Страницы: 52

MSR JC-1290 KB series

Бренд: Glancetron Страницы: 30

Бренд: PAX Страницы: 17

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды