Skywalk CULT-C, Руководство/Сервисное обслуживание

Страница: 39 / 56

39
different body types and strengths can influence activation. Before the installation, it
should be checked if the rescue must be repacked. Packing interval is normally every
six months, according to the operating instructions of the rescue. All of the required con-
nection parts e.g.shackles must be on hand.
connection of the rescue with the harness and rescue handle
The rescue consists of the rescue itself, the red rescue handle as well as a connection
strap from the harness to the rescue. The rescue handle must be led through the loop
on the inner container of the rescue. This should unconditionally be the outermost loop.
Corner or middle loops may not be used (compare pictures above). In order to connect
the rescue to the harness, the connection line of the rescue must be attached to the
connection strap of the harness with a connecting part of at least 2400 daN strength,
e.g. Maillon Rapid 6 mm shackles. Additionally, the straps should be fixed with rubber
rings on both sides of the shackle. Strap/strap connections are not recommended,
since they slip when asymmetrically fixed and can tear upon rescue activation from the
heat of the resulting friction. After the rubber rings have also been fixed, the rescue is
completely connected with the harness and can be installed in the harness.