Troubleshooting
and C
ar
e
49
48
Cleaning the SKYTROFA Auto-Injector
If the auto-injector is dirty or if medicine
has been spilled onto it, clean with a damp
cloth. Before cleaning, the cartridge must
be removed.
The green top needs to be cleaned on the
outside and on the reachable part of the
inside.
If medicine is spilled inside the auto-
injector, turn it upside down to let the
medicine run out.
Do not
place the auto-injector in liquid.
Do not
clean the auto-injector while
charging.
Do not
sterilize the auto-injector.
Maintenance of the
SKYTROFA Auto-Injector
The battery is not replaceable.
Do not
open, try to repair, or change the
auto-injector. Please call Ascendis Pharma
Customer Support. For contact information
b
back cover.
Cleaning and Maintenance
Charging the SKYTROFA Auto-Injector
Connect the USB (large end of the cable) to
the charger. Plug the charger into a power
outlet. Connect the Micro-USB (small end
of the cable) to the rear of the auto-injector.
For protection, charge the auto-injector
with the protective cover on. Read more
b
pages 8–9.
Only charge the auto-injector when the
battery icon is flashing green or red.
Read more
b
pages 44–45.
Do not
attempt to use any charging
adaptor or charging cables other than
those included with your auto-injector.
Other adaptors or cables may create
problems and may interfere with device
operation.
Do not
clean the auto-injector while
charging.
The auto-injector cannot be used when
connected to the charger.
If a cartridge is inserted in the auto-injector,
the Micro-USB cannot be connected to the
auto-injector. Likewise, a cartridge cannot
be inserted into the auto-injector if the
Micro-USB is connected to the auto-injector.
Charging and Charger Cable
Содержание Auto-Injector
Страница 1: ...Instructions for Use Single patient use ...