Skytrofa Auto-Injector, Инструкция по эксплуатации

Страница: 2 / 35

• Important Information
• Before You Begin
• Setting Up
• Step-by-Step Guide
• Troubleshooting
• Cleaning and Maintenance
• Charging and Charger Cable
• Storing
• Product Safety
• Expiration
• EMC Compliance Levels
• Technical Specification
• Symbols
• Warranty and Disclaimer
• Parts Overview
Getting Started
Troubleshooting
and Care
Product Information
Insert
cartridge
into
flashing
green
top.
3.1 3.2
Click
cartridge
in place.
(Green top
will stop
flashing, mixing
icon will
light up, and
battery icon
will switch off)
After
click,
remove
finger
from
cartridge.
3.3
Then take the second injection by repeating
Step 1 to Step 11 with a new cartridge and needle
before continuing to Step 12.
1 Check and assemble cartridge and needle
1.1 1.2 1.3
9.2 9.1
Keep upright
until you hear
2 loud beeps
and the entire
progress bar
lights up.
Pull off needle
cover.
Do not twist.
Keep needle
cover for
later.
Wash hands.
Medicine is ok to use if it is colorless
and clear (some air bubbles are ok).
Go to Step 8.
Do not use the mixed
medicine if it has visible
particles. Press the green
button for 3 seconds and
go to Step 10.
Press and hold
green top against
the injection site for
10 to 15 seconds
until you hear 2
loud beeps.
Remove the
auto-injector
from skin and
wait until you
hear 2 loud
beeps.
(Green top
will flash 2 times
and check
mark icon
will light up)
(Green top will
start flashing)
Check that
cartridge is empty.
Put used cartridge and
needle in a sharps
disposal container.
(More info:
See Instructions for Use - page 34)
Put on the protective cover.
Store at room temperature
between 59°F to 86°F (15°C to 30°C),
to be ready for next use.
Back Front
Stomach (abdomen)
Thighs
Buttocks
6.1 6.2
10.1 10.2 10.3
6 Finish mixing
5 Turn the auto-injector up and down
8 Prepare for injection
11 Check cartridge and throw away
12 Store the auto-injector
9 Inject medicine
2 Turn on the auto-injector
3 Insert cartridge
4 Wait while mixing 10 Remove cartridge 7 Check mixed medicine
Check expiration
date and cartridge
dose on cartridge
pack.
Press and
release the green
button to turn on
the auto-injector.
(You will hear 2
loud beeps.
Battery icon
will light up and
green top will
start flashing)
Wait until you
hear 2 loud
beeps and the
entire progress
bar flashes.
(Eye icon will
light up)
Check
expiration
date on
needle.
Wait 4 to 8
minutes for the
auto-injector to
mix medicine.
Watch progress
bar gradually
light up.
Turn the auto-injector up
and down.
A tick sound confirms
the turns are correct.
Turn 5 to 10 times
until you hear
2 loud beeps and
the progress bar,
except the top
element, lights up.
Remove
paper
from
needle.
year month
YYYY MM -
day
DD -
Expiration date Expiration date
year month
YYYY MM -
Cartridge dose
Screw needle
tightly on cartridge.
Do not remove
needle cover.
Press
needle
cover into
flashing
green top.
Press
needle
cover
down to
release
cartridge.
Remove
used
cartridge.
8.1 8.2 8.3
Choose an injection site:
Stomach (abdomen),
thighs, or buttocks.
Change the injection site for
every injection.
Clean injection
site with alcohol
wipe. Do not
inject through
clothes.
Does your weekly dose require 2 cartridges ?
Prepare Mix Inject After injection
Wait 4 to 8
minutes
How to Use
1 4 7 10
2 5 8 11
3 6 9 12