Skytech: 7060TX SkyBridge
Rev. 9-15-20 Page 8
24-HR 12-HR
12-HR
24-HR
12-HR
01hr
1AM
13hr
1PM
02hr
2AM
14hr
2PM
03hr
3AM
15hr
3PM
04hr
4AM
16hr
4PM
05hr
5AM
17hr
5PM
06hr
6AM
18hr
6PM
07hr
7AM
19hr
7PM
08hr
8AM
20hr
8PM
09hr
9AM
21hr
9PM
10hr
10AM
22hr
10PM
11hr
11AM
23hr
11PM
12hr
12PM
24hr
12AM
Table 1
24-hr to 12-hr AM/PM Time Table. These times are
used when setting Delay times or Program start and stop
times.
Symptom:
App will not connect to SkyBridge
Remedy:
1. Ensure Smartphone is within Bluetooth range.
2. Ensure no other Smartphone is connected to
SkyBridge. Only one Smartphone or Tablet may be
connected at a time.
3. From connection screen, pull down to re-scan for
available SkyBridges.
4. Restart Smartphone (power OFF and back ON)
5. Remove batteries from SkyBridge, check voltage and
replace if less than 1.2 volts each. Reinstall fresh
batteries and reset SkyBridge.
Symptom:
SkyBridge app works, but device will not
respond
Remedy:
1. Ensure device works with button or handheld
transmitter.
2. Repeat device learning process. See Fig. 14, page 6.
• Battery Powered Receivers:
Check batteries in
receiver and ensure they are a min. 1.2 volts each
• Ensure the fireplace pilot is operating and gas control
valve is in the ON position (See Fig. 17).
• 120VAC Powered Receivers:
Check LED power
indicator. Ensure receiver is plugged in and has
power (See Fig. 18).
• Ensure electrial device (i.e. Lamp) is plugged into
reciever and its switch is in the ON position.
TROUBLESHOOTING
LEARN
REMOTE ON
OFF
Fig. 17
Battery powered receiver.
Fig. 18
120VAC powered receiver.
