Skytech: 7060TX SkyBridge
Rev. 9-15-20 Page 1
INSTALLATION AND OPERATING INSTRUCTIONS
IF YOU CANNOT READ OR UNDERSTAND THESE INSTALLATION
INSTRUCTIONS DO NOT ATTEMPT TO INSTALL OR OPERATE
NOTE:
This product is designed for use with an
attended hearth appliance or fire feature. Adults must
be present when the Control System is operating. DO
NOT program or set this Control to operate a hearth
appliance or fire feature when Adults are not physically
present. Furthermore, DO NOT leave the hearth
appliance or fire feature burning unattended; it may
cause damage or serious injury. If an Adult is going
to be away from the hearth appliance or fire feature
for any length of time, then the handheld/wall mount,
receiver/control module and application should be in
the“OFF” position.
INTRODUCTION
SkyBridge is a compact, battery operated, wireless,
Bluetooth to Radio Frequency (RF) converter. See Fig. 1.
It enables you to control a device, from any Smartphone or
Tablet and converts it into 433MHz radio frequency signal
to control compatible remote controls.
The system comes complete with (1) SkyBridge and (2)
AAA batteries.
Model:
7060TX SkyBridge
BASIC OPERATION
SkyBridge App
SkyBridge
Fireplace
Receiver
Lamp
Bluetooth Signal
Fig. 1
SkyBridge
Fig. 2
SkyBridge basic operation.
TABLE OF CONTENTS
Preparing SkyBridge
2
Downloading SkyBridge App
3
Bluetooth Settings
3
First Time Connection
3
Opening App
3
Home Screen
4
Settings Screen
4
Sync Configuration Screen
5
Room Selection Screen
5
Room Device Selection Screen
6
Device Control Screen
6
Event Selection Screen
7
Event Setup Screen
7- 8
Immediate
8
Scheduled
8
Cycle/Repeat
9
Troubleshooting
9
