These warnings and safety notes are particularly important.
Please follow the instructions for maximum safety;
otherwise the charger and the battery can be damaged or at
worst it can cause a fire.
Never leave the charger unattended when it is connected to its
power supply. If any malfunction is found, TERMINATE THE
PROCESS AT ONCE and refer to the operation manual.
Keep the charger well away from dust, damp, rain, heat, direct
sunshine and vibration. Never drop it.
The allowable DC input 11-18V.
This charger and the battery should be put on a heat-resistant,
noninflammable and nonconductive surface. Never place them on
a car seat, carpet or similar. Keep all the inflammable volatile
materials away from operating area.
Make sure you know the specifications of the battery to be
charged or discharged to ensure it meets the requirements of this
charger. If the program is set up incorrectly, the battery and
charger may be damaged .It can cause fire or explosion due to
overcharging.
Be very careful to choose the correct voltage for different types of
battery otherwise you may cause damage to the batteries. Incorrect
settings could cause the cells to fire or explode.
Standard Battery Parameters
3.7V/cell
Nominal
Voltage
Min. Discharge
Voltage
Max Charge
Voltage
Storage
Voltage
Allowable
Fast Charge
3.7V/cell
4.2V/cell
3.8V/cell
≦
1C
LiPo
LiIon
3.6V/cell
4.1V/cell
≦
1C
3.3V/cell
3.6V/cell
3.3V/cell
≦
4C
LiFe
3.0-3.3V/cell 2.9-3.2V/cell 2.6-2.9V/cell
1.2V/cell
1.5V/cell
n/a
1C-2C
NiCd
1.2V/cell
1.5V/cell
n/a
1C-2C
NiMH
2.0V/cell
2.46V/cell
n/a
≦
0.4C
Pb
0.1-1.1V/cell 0.1-1.1V/cell
1.8V/cell
LiHV
3.7V/cell
4.35V/cell
3.85V/cell
≦
1C
3.1-3.4V/cell
Special Features
Re-Peak Mode of NiMH/NiCd Battery
In re-peak charge mode, the charger can peak charge the battery
once, twice or three times in a row automatically. This is good for
making the battery fully charged.
Cyclic Charging/Discharging
1 to 5 cyclic and continuous process of charge > discharge or
discharge > charge is operable for battery refreshing and balancing
to stimulate the battery's activity.
Battery Voltage Meter
The user can check battery's total voltage, the highest voltage, the
lowest voltage and each cell's voltage.
Capacity Limit
The charging capacity is always calculated as the charging current
multiplied by time. If the charging capacity exceeds the limit, the
process will be terminated automatically when you set the maximum
value.
Temperature Threshold*
The battery's internal chemical reaction will cause the temperature of
the battery to rise. If the temperature limit is reached, the process will
be terminated.
* This function is only available by connecting optional temperature
probe, which is not included in the package.
Processing Time Limit
You can also limit the maximum process time to avoid any possible
defect.
Battery Internal Resistance Meter
The user can check battery voltage and battery internal resistance.
Warning and Safety Notes
· 04
B6 V2
05 ·
B6 V2
Storage Mode of Lithium Battery
“STORAGE” has the capacity to control the final battery voltage,
which is necessary and helpful for a rarely used battery.
