DJI Battery Program
DJI Battery Program
Press the ENTER button and the amp rate
value will begin blinking. Use the INC or DEC
button to adjust the value to the desired rate.
Follow the instructions provided on your
battery when setting the charge current.
Press and hold the ENTER button for 3 seconds
to start charging.
Once charging has commenced, the charger
will display the following real-time information:
charging current, battery voltage, working
mode, elapsed time and charged capacity.
Once the battery is fully charged, the screen
will read "FULL" and the charger will emit a
ringing sound. You can press the STOP
button at any time during the charging
process to stop charging.
This program is only suitable for charging/ discharging DJI Mavic
and TB4X battery, B6V2 offers two operation modes: charge and
storage.
Selecting the Battery Type:
After powering on the B6 V2, press DEC or INC, DJI BATT program
involved in the "TOOL KITS" program, press the INC or DEC button
repeatedly until you reach the appropriate program for the battery
type you wish to charge. For this example we have chosen the "DJI
DRONE BATT Mavic" or "DJI DRONE BATT TB4X" program. Now
press the ENTER button to enter the desired program.
Connect the battery to the charger as show on the diagram.
Turn on the battery before you put it in charging mode.
CONNECTION DIAGRAM
Note: Mavic charging cable is not included
in the package
Press the Power Button once
Then Press Again and Hold
for 2 Seconds to Turn On
BATT/PROGRAM
TOOL KITS
DJI DRONE BATT
Mavic
Charge Mode:
When the battery is idle for temporary days, it is
better to charge/ discharge the battery to 65%
of total power in order to prevent swelling.
Turn on the battery before you put it in storage
mode.
After selecting the correct battery type, use
the INC or DEC button to change the charge
mode to "STORAGE" mode setting.
Press the ENTER button and the amp rate
value will begin blinking. Use the INC or DEC
button to adjust the value to the desired rate.
Follow the instructions provided on your battery
when setting the charge current.
Press and hold the ENTER button for 3 seconds
to start charging.
Once charging has commenced, the charger
will display the following real-time information:
charging current, battery voltage, working
mode, elapsed time and charged capacity.
Once the battery is fully charged, the screen
will read "DONE" and the charger will emit a
ringing sound. You can press the STOP button
at any time during the charging process to
stop charging.
Storage Mode:
ENTER
ENTER
Mavic CHARGE
TURN ON BATTERY
BATT/PROGRAM
TOOL KITS
DJI DRONE BATT
Mavic
ENTER
ENTER
Mavic CHARGE
TURN ON BATTERY
Mavic STORAGE
TURN ON BATTERY
PRESS
ENTER
>
3
"
PRESS
ENTER
>
3
"
+ -
50% 10.20V
00301mAh
C 2.0A
FULL 12.61V
00568mAh
0.0A
FULL 12.61V
00:05:25
0.0A
50% 10.20V
00301mAh
C 2.0A
DONE 12.61V
00568mAh
0.0A
DONE 12.61V
00:05:25
0.0A
· 26
B6 V2
27 ·
B6 V2
