SkyPilot SkyExtender DualBand, Инструкция по установке и настройке

Страница: 74 / 79

SkyPilot SkyExtender DualBand Installation and Setup Guide 74
From your Telnet application, open a connection to the access point.
3
Log in by entering the default user name (
admin
) and password (
public
) at
the command prompt.
Once you’re logged in, you can use the command-line interface to set
configuration parameters or retrieve the IP address of the access point
4
Get the IP address of the access point.
Because there are two radios inside the SkyExtender DualBand, you request
the IP address of the “B” radio by entering the following command:
ifconfig br0
Figure 61. Checking “B” radio IP address
This example shows the IP address of the access point (
inet addr
) as
192.168.2.18.