SkyPilot SkyExtender DualBand, Инструкция по установке и настройке

Страница: 52 / 79

SkyPilot SkyExtender DualBand Installation and Setup Guide 52
Figure 35. Access Point Configuration page
After modifying the access point configuration settings, click the
Save
or
Save to
flash and activate
button at the top or bottom of the page:
o
Click
Save
to save your changes to volatile RAM on the access point. A
message confirms the change in configuration.
o
Click
Save to flash and activate
to save your changes to flash (nonvolatile)
memory and instantly update the SkyExtender DualBand access point’s active
configuration. (You can also save all configuration changes to flash memory
from the Configuration Management Commands page, as described in the
section “Configuration Management Commands page” on page 72.)
Names and addresses
Use the top area of the Access Point Configuration page to view and edit names
and general address settings for the access point.