SkyPilot SkyExtender DualBand, Инструкция по установке и настройке

Страница: 58 / 79

SkyPilot SkyExtender DualBand Installation and Setup Guide 58
After making edits on the WLAN Details page, click
Save
to save your changes to
volatile RAM on the access point, or
Save to flash and activate
to save them to
flash memory and instantly update the access point’s active configuration.
After a save, the WLANs page reappears, displaying the new WLAN or updated
details of the edited WLAN. If you leave the WLANs page without saving the
modified configuration to the access point, you can go to the Configuration
Management Commands page and perform the necessary steps to save the new
information to the access point’s flash memory. For more information, see the
section “Configuration Management Commands page” on page 72.
Figure 41. WLAN Details page
WLAN SSID.
(Required) Use this field to supply the SSID that’s announced for this
WLAN. The text string you enter here will appear to 802.11 clients as the name of
a WLAN (unless
Broadcast SSID
is not enabled).
Default VLAN ID.
Use this field to identify the data VLAN ID mapped to this WLAN.
If this ID is set to 0, there is no VLAN assignment.
NOTE
If you’re configuring the new WLAN for 802.1x or WPA, a Radius server
can override the default VLAN setting on a per-user basis.
Broadcast SSID.
If checked, the access point will broadcast its SSID to 802.11
clients, making it visible to users. If unchecked, the access point will not broadcast
the SSID. However, users can still choose to associate with this SSID/WLAN if they