SkyPilot SkyExtender DualBand, Инструкция по установке и настройке

Страница: 66 / 79

SkyPilot SkyExtender DualBand Installation and Setup Guide 66
SNMP v1/v2 Communities area
The SNMPv1/v2 Communities area of the SNMP Server Settings page displays
existing SNMP communities and provides commands for editing, deleting, or
creating communities.
Clicking
New
after
SNMPv1/v2 Communities
displays the Community page,
where you can configure a new SNMPv1 or SNMPv2 community.
Figure 50. SNMPv1/v2 Community page
Community Name.
Sets the SNMPv1/v2 community name.
IP Address.
Along with the
IP Mask
field, specifies which IP addresses can access
the SNMPv1/v2 agent with this community name. An IP address of 192.168.2.0
with an IP mask of 255.255.255.0 specifies that any IP address in the range
192.168.2.1 to 192.168.2.254 can access the SNMPv1/v2 agent with this
community name.
IP Mask.
See
IP Address.
Access Mode.
Sets the community to read-only or read-write access.
Status.
Enables or disables the community.
SNMPv3 Users area
SNMPv3 supports full authentication and encryption of access to the SNMPv3
agent. You can configure multiple SNMPv3 users, each with a unique name,
authentication protocol, privacy protocol, and access mode.