Skymsen SKG, Инструкция по эксплуатации

Страница: 7 / 20

04
1.3 Technical Characteristics
2.1 Installation
The Band Saw must be installed onto a stable working surface. Verify
if the voltage of the power point it will be connected to is 110V.
The cord has a plug with two flat pins and one round pin .The round
pin is earth, the three pins shall be properly connected before to start the saw
.
Table - 01
2. INSTALLATION and PRE OPERATION
A = 59” (with ) Thickness Guide
A
3
5
”
AREA FOR
THE SAW
INSTALLATION
Front Side
Characteristics Unit SKG
Average Production lb/h até 1000
Voltage V 110
Electric Current A 13,8
Frequency Hz 60
Power Rating HP 2
Consumption kW.h 1,47
Height Inches 1850
Width Inches 915
Depth Inches 824
Net Weight lb 103
Gross Weight lb 125
Maximum Cut Width Inches 390
Minimum Cut Height Inches 430