Assembly & Operation Manual
CONTROL LINKAGES
Flaps : 95mm
Aileron : 75mm
Elevator : 65mm
Rudder : 85mm
Steering: 55mm
WINGS
NOTE:
Make sure to have some sort of protective
foam on the work bench. This will protect the
paint surface from unwanted dents. Assemble
both wings simultaneously. Mark
√ each step.
Cut root rib with Dremel cut off disk
Use Dremel drum sander to sand to
shape.
Trial fit LG & make sure root clear LG.
Use Aeropoxy to glue LG blocks and LG ribs
to skin of wing.
Check servo mounts. Use CA to glue plywood
if needed.
Check operation of Flaps and Ailerons.
Trim if needed. Make sure surfaces move
freely.
P-11
Photo 11
Photo 12
Photo 13
