3. Operation SMS Command
Function
Command
Reply
Recipient
A.B.C
*PWD*Axxxxxxxxxx
*Bxxxxxxxxx
*Cxxxxxxxx#
Armed( UnArmed);A:xxxxxxxxB:xxxxxxxxxC:xxxxxxxx
(Add ‘+’and natiaon code according to needs)
Time Zone
*PWD*GMT+/-xxxx#
GMT+/-xxxx SETUP OK!
New PWD
*PWD*Exxxx#
Password has been changed!
Arm *PWD*S#
Armed;ACC:on/off;Door:close/open;LAC:xxxxx;CID:xxxxx;Time:
XX
-
XX
-
XX
XX
:
XX
:
XX
Speed:xxxkm/hS/Nxx.xxxx W/Exxx.xxxx
Disarm *PWD*C#
Unarmed; ACC:on/off;Door:close/open;LAC:xxxxx;CID:xxxxx;Time:
XX
-
XX
-
XX
XX
:
XX
:
XX
Speed:xxxkm/hS/Nxx.xxxx W/Exxx.xxxx
Stop Car
*PWD*STOP#
Engine will be turned off!
Cancel STOP *PWD*K#
Relieve ‘STOP’ & Unarmed
Factory default *PWD*V#
Factory Default Restored!
Recipient Query *PWD*Y#
Armed(UnArmed);A:xxxxxxB:xxxxxxC:xxxxx
Car status
Query
*PWD*X#
Armed/Unarmed;ACC:on/off;Door:close/open;Power:on/off;LAC:xxxxx;CID:xxx
xx;Time:xx-xx-xxxx:xx:xxSpeed:xxxkm/h;S/Nxx.xxxx W/Exxx.xxxx / NO GPS
Auto-armed
On/Off
*PWD*AON#
*PWD*AOFF#
Auto-arm ON!
Auto-arm Off!
Unlock
On/Off
*PWD*UL1#
*PWD*UL0#
Auto unlock door on !
Auto unlock door off !
*PWD*GPS# $GPRMCxxxxxxxx
*PWD*GPSD#
Time:xx-xx-xx xx:xx:xx Speed:xxxkm/h S/Nxx.xxxx W/Exxx.xxxx
*PWD*GPSM# Time:xx-xx-xx
xx:xx:xxSpeed:xxxkm/h;S/Nxxdxxmxxs
W/Exxxdxxmxxs
*PWD*GPSW#
http://maps.google.com/maps?f=q&hl=en&q=(-)xx.xxxxxx,(-)xxx.xx
xxxx&ie=UTF8&z=16&iwloc=addr&om=1
GPS data
Query
No GPS
NO GPS!Time:xx-xx-xx xx:xx:xx Speed:xxxkm/h S/Nxx.xxxx W/Exxx.xxxx
4. Remote Control RF code Setup
Install the device; pull out 20pin wire from J1
and switch off the battery
Press and hold SOS button
Turn on power (plug into J1). A beep will be heard
Press any key of the remote control
A beep will be heard. Then release the SOS button
Turn off power again. (pull out 20pin wire)
Power on (plug 20pin wires into J1),
the device works again
test the remote control
- 22 -