1. Alarm Setup
1.1 Set up recipient A, B and C
Send the SMS to the device: Set successfully, the reply SMS:
Change or Cancel recipients
：
re-set new recipients.
Note:
①
A, B, C indicates the recipients A, B, C.
xxxxx…indicates the recipients’ mobile phone number. Max: 20 digits.
②
“+country code” should be added when SMS format requires
SMS Format: + Country Code + mobile phone number.
③
Recipient number is blank if you do not set up it.
Exp:
Recipient A,C setup
：
*1234 *A+8613666504824*B*C+8613666502528
＃
（
+86 refers to China code; 136xxxxxx refers to Recipients mobile number
）
1.2 Set up Time-zone
Send the SMS to the device: Set successfully the reply SMS:
*UPWD*AXXXXXXX*BXXX
XXXXX*CXXXXXXXX#
Armed/Unarmed;A:XXXXX,
B:XXXXXXXX,C:XXXXXXX
;
*UPWD*GMT+/-xxxx#
GMT+/-xxxx Setup OK!
Note:
‘+’ is east zone; ‘-’ is west zone
Exp:
East 8 zone (GMT+08:00), the SMS should be *1234*GMT+0800#
West 3:30 zone (GMT-3:30), the SMS should be *1111* GMT-0330#
2. Basic Operations
2.1 Arm the Device:
◆
On armed mode, the state LED is on.
◆
While arming, the doors are auto-locked.
A. Arm the system manually:
> Press ‘ ’ key on the remote control,
the siren sounds once.
- 10 -
