4.3 Cut off power (fuel):
When the burglar drives your vehicle away,
you can stop the vehicle by SMS (‘STOP’ command) or by the
voice prompt of the phone. (Refer to Voice Operations)
WARNING: This command might be very dangerous when the car is
MOVING! Please BE CAUTIOUS to activate this function!
APPENDIX
1. Problem and Solutions
PROBLEMS Cause
SOLUTIONS
Remotes are locked or
don’t work
the 27A battery or lose code
> Replace with new battery
> Re-code the remote·
Password lost
>Get from the Carrier
SIM card can not be
accessed to network:
> No balance in SIM card.
> Install unsuccessfully
> Confirm GSM network frequency .
>Install SIMcard well
> Keep balance
Weak GSM signal
> Increase sensitivity of antennas
> Check the GSM ANT connection.
> Put it at suitable position
No GPS signal
> Probably caused by location and
weather
> Check your antenna connection.
> Put it at suitable position
No SMS received
> Network is busy
> SMS is delayed
> Weak signal
Alert is not reported
>Confirm the power supply(12/24V)
of the vehicle
>Temperature is too low
>The device and power must be
matching
> Work Temp over -20
℃
2. Alert SMS Format
Alert mode
Switch On / Off
Alert Format
Shake
Armed
ON: *PWD*H#
←→
Shake alert on!
OFF: *PWD*N#
←→
Shake alert off!
Shake Alert
SMS to A
Door Open
Armed
Door open Alert
SMS to:A.B.C Phone call A
ACC ON
Armed
Engine on Alert
SMS to:A.B.C; Phone call A
High-jack
Highjack Alert
SMS to:A.B.C; Phone call B,C
POWER OFF
Armed / or no limitation
*PWD*PW1#
←→
Power Off Alert On
*PWD*PW0#
←→
Power Off Alert valid on armed.
Powe-off Alert
SMS to:A.B.C; Phone call A
MOVE ALERT
Armed
ON: *PWD*MOVExxx#
←→
Movexxx alert on!
OFF *PWD*MOVE000#
←→
Move alert off !
Move Alert
SMS to:A.B.C; Phone call A
OVER SPEED
During driving
ON: *PWD*SPDxxx,ss#
←→
Over SPDxxx alert on !
OFF: *PWD*SPD000#
←→
Over SPD alert off !
Overspeed Alert
SMS to A
- 21 -
