SKS-Kinkel Elektronik GmbH
Indoor station HT4600, Receiver, 2-wire
EN
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: [email protected]
Version No. 3.0
Document No. 97005003
38
Attention
After a reset only the one call address set at the DIP switch is effective.
9 Operation
T
he HT4600 indoor station is operated with the keys and the receiver. Using these most functions are performed and
settings are changed.
9.1
Keys
1. Door opener key
2. Tone key
3. Special key
4. Light key
Apart from that numbered keys from 1 to 6 for internal calls
for item 200010
The functions are described in the following table:
Keys
Function
Description
Answer call
An incoming call is signalled by the ringtone being played and
by the flashing of the door opener LED and the light LED. To
answer a call pick up the receiver after the indoor station has
rung, to end a call put it down again.
To mute a call for a short time (up to 6 seconds) you can put
down the receiver, when you pick it up again you can go on
speaking.
Please mind that a call is active for a maximum of 2.5 min-
utes only after ringing and that the door opener will also
function in this time span only.
+
Deactivate ringtone
(only items 200009 and
200010)
Pick up the receiver and hold the tone key (for about 5 sec
-
onds) until you hear three short signal tones confirming that the
ringtone is now deactivated. To signal this the door opener LED
and the light LED are flashing once per second.
Please mind that the ringtone is automatically reactivated
after 12 hours or after power failure.
The mute function is effective for door calls and floor calls.
When a call comes in the flashing rate increases and is now
twice as fast.
