SKS-Kinkel Elektronik GmbH
Indoor station HT4600, Receiver, 2-wire
EN
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: [email protected]
Version No. 3.0
Document No. 97005003
36
8.4.4
Deleting all internal call addresses from keys
+
Single internal call addresses may not be deleted. All internal call addresses are always
deleted at once. To do so keep hold of the programming key and one of the internal call
keys. Deleting is finished when you hear a three-second high signalling tone.
8.4.5
Example
There are three indoor stations which are supposed to communicate with the door station AND with each other.
Thus the following programming is necessary:
Storage location
Indoor station 1
Indoor station 2
Indoor station 3
Position 1 in the indoor
station’s storage space
A1
A2
A3
Position 2 in the indoor
station’s storage space
B1
B2
B3
Key 1
B2
B1
B1
Key 2
B3
B3
B2
To program indoor station 1 in full the following steps are necessary:
Step
Image
Description
1
A1
Set DIP switch to the main call address (= 1
st
position in your storage
space, in our example from above A1), this responds to the referring bell
button at the door station.
2
Keep hold of the programming button at the back of the device for five
seconds until you hear a signalling tone.
After this signalling tone another, shorter tone will be played signalling
that programming the first call address has been successful (storage
location no. 1).
