sks HT 4600, Руководство по установке

Страница: 33 / 44

33
Support Hotline: +49 (0) 2661 98088-112
Support E-Mail: support@sks-kinkel.de
Version No. 3.0
Document No. 97005003
SKS-Kinkel Elektronik GmbH
Indoor station HT4600, Receiver, 2-wire
EN
Step Description
5 Change the DIP switch to the second call address (= 2
nd
position in your storage space)
which responds to calls sent to this indoor station.
6 Keep hold of the programming button at the back of the device for about five
seconds until you hear a signal tone.
7 After this signal tone you will hear another two short tones when programming the second call
address, three for the third and four for the forth call address programmed, so that you know
exactly which call address has been saved in which position (1 to 4) ín your storage space.
8 To program further call addresses repeat steps 5 to 7. If you try to program more than four
call addresses this will be refused and signalled by a respective tone.
Hinweis
We do highly recommend to change the DIP switch back to the indoor station’s main
call address (i. e. the first address programmed), so that it can easily be recognized
which bell button belongs to which indoor station in case of a breakdown.
A maximum of four call addresses can be programmed into an indoor station. In case call
addresses need to be changed all addresses that have been programmed into the indoor
station have to be deleted.
8.4
Programming of internal call addresses
8.4.1
Internal call addresses, the indoor station responds to
Internal calls can only be performed with the HT4600 version with ten keys (item 200010), here up to six different
call addresses can be called.
If internal calls are planned for a system, all relevant call addresses for each indoor station have to be pro -
grammed into it. The indoor station HT4600 has four storage places for call addresses, the first of which is always
used for its own call address, which responds to calls coming in from the door station (ringing the bell at the door
station) and which identifies the indoor station.
All in all four call addresses can be programmed into an indoor station, these can be used for the following func -
tions:
Type of call Description
Door call Call from one or more door stations to an indoor station
Internal call Call from an indoor station to another indoor station
Group call Call from an indoor station to more than one indoor stations
To program internal call addresses, the indoor station responds to (= receiving indoor station) follow these steps:
Step Description
1 If unsure whether call addresses have already been programmed into the indoor station or
which call addresses have been programmed we recommend to delete all call addresses
saved in the indoor station (see next chapter „Deleting all call addresses“).
2 Switch the DIP switch to the main call address (= 1
st
position in your storage space) which
responds to calls made from the respective bell button at the door station.