Folding
›
Remove the rear strip
from the wells.
›
Place the rear strip
against the front strip
and fold the two strips
together by turning
them.
›
Remove the rear strip
from the hooks.
›
Place the rear strip
against the front strip
and fold the two strips
together by turning
them.
Removing and inserting
Removing
›
Remove the boot cover.
›
Take out the folded pocket in an upwards direc-
tion.
Inserting
›
Put the end of the strip
A
on the holder
B
.
›
Proceed in the same
way on the left side.
›
Insert the end of the
strip marked with in-
to the right-hand
mount and the end of
the strip marked
with into the left-
hand mount.
Version 1
Version 2
Version 1
Version 2
Net partition
Attach the net partition
Unfolding/folding
›
Open the arms of the
cross bar until you hear
the locking button au-
dibly click into place.
›
Press the safety button
and fold the arms of
the crossbar together.
The folded mesh partition can be stowed under
the variable loading floor.
Attach at the back
›
Remove the roll-up cover or fold up the rear seat
backrests.
›
Insert the crossbar into the mount
A
on one side
and push it forwards.
›
Fix the bar in the same way on the other side.
›
Snap the carabiners
B
into the lashing eyes.
›
Pull the straps firmly at the free ends
C
.
Fasten in the front
The procedure is analogous to the process behind.
The lashing eyes for the carabiner are located under
the central body pillars.
Loosening
Loosening takes place in the reverse order to fixing.
154 Storage space and interior equipment ›
Net partition