Skoda Infotainment Navigation Columbus, Руководство по эксплуатации

Страница: 45 / 96

Message Meaning
To use the Bluetooth function,
please switch the ignition on.
Switch on the ignition.
Please switch on Bluetooth.
Switch on the Bluetooth
®
function on
the device.
Please search for and connect a mo-
bile telephone. Find telephone and connect to the
device.
Telephone not available.
A problem with the Bluetooth
®
unit in
the device, consult a specialist.
Telephone is currently not available.
Unknown
(Name of the telephone service pro-
vider)
The telephone did not provide any in-
formation regarding the telephone
service provider.
Pairing and connecting

Introduction
This chapter contains information on the following subjects:
conditions for coupling
42
Telephone search 42
Pairing - no telephone connected 43
Pairing - a telephone is connected 43
Pairing - two telephones connected 43
Connected SIM card in an external module, no telephone connected 44
Connected SIM card in an external module, a telephone - coupling 44
Pairing from the telephone 44
Pairing confirmation 44
Administering coupled devices 45
The pairing procedure is dependent on the number of telephones already con-
nected, whether using the inserted SIM card in the external module or via the
telephone using the profile rSAP
» page 39 , Possible connection types .
To connect a telephone with the device, the two devices must be paired via
Bluetooth
®
.
A connection with a telephone that is already paired does not require coupling.
It is enough to find the telephone that has been coupled in the list of coupled
telephones and make the connection.
If a SIM card is located in the external module with activated telephone serv-
ices, then only one telephone can be connected with the device. Depending on
the telephone used only those telephone contact lists and text messages
(SMS) are available.
Note
■
The range of the connection to the hands-free system is limited to the pas-
senger compartment.
■
The maximum number of paired telephones is 20. Pairing a new telephone
after reaching the maximum number causes the telephone that has not been
coupled for the longest time to be automatically replaced.
conditions for coupling
The telephone can be coupled with the device under the following conditions.
The ignition is switched on.
The Bluetooth
®
function of the device » page 17 and the telephone is
switched on.
The visibility of the device
» page 17 and the telephone is switched on.
The telephone is within range of the Bluetooth
®
signal of the device.
The telephone is compatible with the device.
The pairing can be initiated from the device or from the telephone.
During the pairing and connecting process the device can demand the confir-
mation by the Bluetooth
®
profile (e.g., enable contact import, enable the test
messaging or the connection of an audio player or similar). The telephone dis-
play should be monitored to acknowledge any possible request.
Please refer to the compatibility of telephones as well as updates which are
available for the Bluetooth
®
device, and are available on the following ŠKODA
Internet pages.
http://infotainment.skoda-auto.com
Telephone search
The telephone is not in the list of paired devices
The telephone can be searched for in one of the following ways.
›
If there is no connected telephone to the device, then press the button

→ Find telephone .
›
If there is no telephone connected to the device, then press the button

→

→ Find telephone .






42
Telephone