1.8
Summary of components - Foot controls (Rapid)
Note
♦
Summary of components - Hydraulics
.
♦
After the battery earth strap is disconnected and connected, carry out additional operations ⇒ Electrical
System; Rep. gr. 27 .
♦
Grease all bearing points and contact surfaces with Polycarbamide Grease - G 052 142 A2- .
1 - Front wall
❑ with mount for bearing
bracket and master cyl‐
inder
2 - Bushing
❑ for the top location hole
in the bracket
❑ The bushings for the
bottom location hole in
the bracket are located
in the master cylinder
3 - Bearing bracket
❑ removing and installing
with master cylinder
❑ removing and installing
without master cylinder
4 - 25 Nm
❑ for bracket on front wall
❑ self-locking
❑ 3 pieces
❑ always replace ⇒ Elec‐
tronic Catalogue of
Original Parts
5 - Clutch pedal switch - F36-
❑ removing and installing
6 - Stop
❑ for the clutch pedal
7 - Bearing bolt
❑ always replace ⇒ Elec‐
tronic Catalogue of Original Parts
8 - Over-centre helper spring
❑ removing and installing
9 - Clutch pedal
❑ removing and installing with over-centre helper spring
10 - Bushing
11 - Cap
12 - Support
❑ only replace if the master cylinder has been removed
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
36