Skoda Fabia II 2007, Руководство по ремонту

Страница: 159 / 165

1 - Conical screw, 25 Nm
❑ screw into threaded
piece -Pos. 8-
2 - Right flange shaft
❑ do not interchange, the
left and right flange
shafts are different
3 - Pressure spring for flange
shaft
❑ fitted behind flange
shaft
4 - Thrust washer
❑ Fitting position: Collar
for compression spring
5 - Conical ring
❑ Fitting position: Cone for
differential gear housing
6 - Circlip
❑ holds the conical ring,
stop disc and pressure
spring in position when
the flange shaft is re‐
moved
7 - Large differential bevel gear
❑ installing ⇒ page 159
8 - Threaded part
❑ installing ⇒ page 159
9 - Differential bevel gear shaft
❑ when removing, the ten‐
sioning sleeve
-Pos. 18- is cut out
⇒ page 159
❑ installing ⇒ page 159
10 - Small differential bevel gear
❑ installing ⇒ page 159
11 - Stop disc compound
❑ insert with gear oil
❑ on certain gearboxes the stop disc compound was provided with a land
⇒ page 159
12 - Flange shaft left
❑ with rubber bowl
❑ do not interchange, the left and right flange shafts are different
13 - Sealing ring
❑ for left flange shaft
❑ diameter of left and right differ
❑ replace with installed gearbox
⇒ page 151
14 - Adjusting washer S1
❑ for differential gear
❑ always 1 mm thick
❑ on gearboxes made out of aluminium as of production date 12.06 the adjusting washer S1 for outer ring/
tapered-roller bearing is not fitted ⇒ page 159
❑ Bearing pedestal for outer ring/tapered-roller bearing is adapted
Fabia II 2007 ➤ , Fabia II 2009 ➤ , Fabia II 2011 ➤ , Rapid 2011 ➤ , R ...
Gearbox 02T - Edition 05.2014
2. Differential gear
155