skilsaw SPT88, Инструкция по эксплуатации и безопасности

Страница: 25 / 120

25
Switch
The switch has a secondary LOCK-OFF tab
that must be rotated to the left to be able to
depress the main power switch. Grasp the
main switch with your fingers and slide the
tab to the left. Then pull the main switch to
activate the saw. Release the switch to stop
the saw (Fig. 19).
SAW OPERATIONS
Body and Hand Positions
WARNING
Position your body and
hands properly to make
cutting easier and safer. Observe the
following instructions
WARNING
Never place hands near
the cutting area. Keep
hands outside the “No Hands Zone”. The
“No Hands Zone” is defined as the area
between the lines marked on the left and right
side of the base, including the entire table
and portion of the fence within these marked
lines. This zone is labeled by “No Hands”
symbols placed just inside the marked lines
on the base.
•
Hold the workpiece firmly to the fence to
prevent movement.
•
Keep hands in position until the trigger has
been released and the blade has stopped
completely.
•
Keep feet firmly on the floor and maintain
proper balance.
•
Follow the miter arm when mitering left or
right. Stand slightly to the side of the saw
blade.
•
Look through the lower guard if following a
pencil line.
•
Before making any cut, with the power off,
lower the blade to preview the blade path.
FIG. 19
Incorrect Use Correct Use
Incorrect Use Correct Use
FIG. 20a