Ski-Doo Legend SE 800 SDI 2003, Дополнение к руководству оператора

Страница: 13 / 40

11
RER Mode — 2-TEC Models Only
Shifting in Reverse
With the snowmobile completely stopped and engine running at idle,
rotate the ignition key clockwise completely and release key.
The DESS TM /RER TM pilot lamp will blink and a reverse alarm will
sound once every second with a half a second duration when the
snowmobile is engaged in reverse.
Apply throttle slowly and evenly. Allow drive pulley to engage then
accelerate carefully.
Shifting in Forward
With the snowmobile completely stopped and engine running at idle,
rotate the ignition key clockwise completely and release key.
DESS/RER pilot lamp and reverse alarm will stop.
Apply throttle slowly and evenly. Allow drive pulley to engage then
accelerate carefully.

WARNING
Shifting to reverse mode on these snowmobiles is done by
turning the ignition key clockwise completely and releasing it
when the engine is running. Wait until the reverse alarm
sounds and the DESS/RER pilot lamp begins to blink in the
dash board before operating throttle to proceed in reverse. The
reverse speed of these snowmobiles is not limited. Always
proceed with caution as fast reverse could result in loss of ve-
hicle stability and control. Come to complete stop before turn-
ing the ignition key clockwise completely and releasing it. Al-
ways remain seated and apply the brake before shifting.
Ensure the path behind is clear of obstacles or bystanders be-
fore proceeding.
Mmo2003-011a.book Page 11 Wednesday, January 29, 2003 3:52 PM