28
Shaft alignment tool
SKF TMEA 2
The F1 and F2 values indicated
on the display give the relative
positions of the Movable machine
when viewed from above (fig. 25).
The F1 value for the front pair of
feet, the F2 value is for the rear
pair of feet.
The alignment values indicate the
necessary corrective sideways
movement of the Movable
machine (when viewed from
behind the Movable machine).
A negative value means that the
feet have to be moved to the right.
A positive value means that the
feet have to be moved to the left
(fig. 26).
Observe the coupling and feet
values live adjustment while
moving the movable machine
sideways.
The alignment is complete.
Tighten the feet of the movable
machine.
3.9
Verify alignment
To verify the alignment of the machinery, it is recommended to
execute the measuring procedure once again. To do so, go back by
using the previous button until you reach the first measuring step
(9 o'clock position) and continue as per chapter 3.7.
Fig. 25. Display horizontal
alignment
Fig. 26. Horizontal alignment
