26
Shaft alignment tool
SKF TMEA 2
a) If the measured coupling
values are within the
tolerances, the Movable
machine does not have to be
adjusted. Correct the
horizontal misalignment.
Continue to chapter 3.8.3
Horizontal alignment.
b) If the measured coupling
values are higher than the
acceptable tolerances check
the recommended corrections
of the feet.
The F1 and F2 values on the
display indicate the relative
positions of the Movable machine
when viewed from the side
(fig. 21).
A positive value means that the
feet are too high and need to be
lowered while a negative value
means the opposite (fig. 22).
Loosen the feet of the movable
machine.
Use the shims included with the
tool to adjust the height of the
machine. Observe the coupling
and feet values live adjustment.
After having carried out the
vertical alignment proceed to the
horizontal alignment
(chapter 3.8.3).
Fig. 21. Display vertical alignment
Fig. 22. Vertical alignment
