E
n
g
l
i
s
h
SKF TMEA 2
Shaft alignment tool
17
a) Measure the A, B and C
distances. The default values
for these three distances are:
A = 200 mm (8 in)
B = 200 mm (8 in)
C = 400 mm (15 in)
b) Adjust each value by using
the + and - buttons.
c) Confirm the setting of each
value by pressing the "next"
button.
Note!
If you need to go back and
change values already entered
use the "previous" button.
Fig. 11. Distances A, B and C
