SKF LUBRILEAN Basic, Руководство по эксплуатации

Страница: 17 / 40

Failures Page A - 9
EN
Failures
The following prerequisites must be met for the
compact system to function faultlessly:

The system has been connected correctly.

The inlet pressure of the air pressure supply
of the minimum-quantity lubrication system is
sufficient (at least 2.5 bar).
If, however, failures nevertheless arise, they can
usually be quickly remedied as long as there is
no functional failure of the system.
Table B - 4 contains an overview of a series of
problems which you can remedy yourself. You
should contact us if the problem can not be rec-
tified by taking the measures described here.
Table A - 4. Failures and their Remedy
Problem Possible cause Remedy
Air in the capillary line Flood the lubricant lines as described
in the chapter "First Operation", page
A - 7 and ensure correct ventilation. When switched on there is
little or no oil to be seen at
the nozzle.
Oil filter is blocked or riser is loose Contact our service department.
Air bubbles always appear
when flooding the lubricant
line. Riser is leaky Contact our service department.
Lubricant amount de-
creases during continuous
operation or disappears. Air has collected in the system at
the oil control valve Briefly switch device on and off. If nec-
essary, flood the lubricant lines as de-
scribed in the chapter "First Operation",
page A - 7 and ensure proper ventila-
tion.
Replace the valve if necessary.