3-16
AUTO – Off plane:
Actuator in “AUTO” and the aerator on, fresh water will constantly blend with the recirculated
livewell water.
AUTO – On plane:
The control valve will automatically close the valve to prevent water loss and water from the
aerator pump is automatically diverted to closed recirculation. When the boat is off plane, the control valve
automatically opens the valve to allow fresh and livewell water to livewell. Any water lost through the overflow is
automatically replaced.
RECIRCULATE – On/Off plane:
Actuator in “RECIR” or “AUTO MODE,” outside water is prevented from
entering while the control valve continues to allow the pump to recirculate and aerate the livewell. This position
can be used when trailering fish.
EMPTY – On/Off plane:
Actuator in “EMPTY” position, drains the livewell but does not allow water to re-enter.
Rinse the livewell and baitwell (if equipped) with fresh clean water, remove any debris from the pick-up and drain
screens and allow the livewell to air dry after each use. The pick-up screens are located at the bottom of the
transom and the drain screens are located in the livewell or baitwell.
BASS BOATS
Section 3_2008.qxd:Section 3_horiz.qxd 8/1/07 10:10 AM Page 3-16