1-22
On boats equipped with an automatic bilge system, the bilge switch can be used to override the automatic
system and to test the bilge pump. When the switch is activated, listen to hear if the pump is operating. It
may not pump water unless water is present. Do not operate the bilge pump continuously when it is dry.
Inspect the bilge area frequently for evidence of excessive water. Continuous operation of the bilge pump can
indicate excessive water entering the bilge. Debris can also prevent the pump from operating or make it
operate continuously. Test the bilge pump at regular intervals. Make sure no debris is blocking the bilge pump
float.
Drain Plug:
A drain plug is located at the center of the stern to allow more complete draining when the boat
is removed from the water.
Lights
Check for proper operation of the bow, stern, and instrument lights by pressing the switch on the control
panel. If the stern light is not installed, remove it from the storage area, lift the socket cover, and install it into
the socket to check operation.
Horn
Press the horn switch to be sure the horn operates.
BOATING SAFETY
Section 1_2008.qxd:Section 1_horiz.qxd 8/1/07 4:53 PM Page 1-22