RUNNING
11-7
NOTE
This boat is equipped with either an automatic or a manual electric bilge pump that removes excess
water from the bilge while you are underway. However, some residual water remains that must be
drained by removing the drain plug.
Tighten the hull drain plug securely before launching the Skeeter boat. Clean any foreign material, such as dirt
or sand, from the threads before installing the drain plug.
3. Spray a rust inhibitor, such as Yamaha Silicone Protectant and Lubricant, on metallic parts to minimize
corrosion.
Section 11_2008.qxd:Section 11_horiz.qxd 7/31/07 5:23 PM Page 11-7