Sizewise 33060400 Скачать руководство пользователя страница 44 | Manualshive

Страница: 44 / 71

background image

4

3

WARNING:

Failure to follow the provided battery specifications could result in

patient and/or user injury as well as damage to equipment or other property.

Serial Number Location

The bed has a manufacturer serial number, and a Sizewise Rentals LLC serial number. The
serial numbers are located at the foot of the bed.

Serial Number

IV Pole

The  IV  pole  can  be  placed  in  any  of  the  four  accessory
attachment points on the bed.  They are located at the four
corners  of  the  bed,  two  at  the  head  section  and  two  at
the  foot  section.   The  weight capacity of the IV  pole is
rated at 50 lbs. (22 kg).

WARNING:

If the weight capacity of the IV pole is exceeded, it could result in

patient and/or user injury as well as damage to equipment or other property.

Trapeze Assembly

This trapeze is rated with an 850 lb. (385 kg) weight capacity.

WARNING:

If the weight capacity of the trapeze is exceeded, it could result in

patient and/or user injury as well as damage to equipment or other property.

HAZARD:

Pay close attention to pinch points on the bed to avoid injury to the

patient and/or care provider.

WARNING:

Do not attempt to install, perform maintenance, or use this

product without first reading and understanding these instructions

and accompanying documents such as, the User Manual, Technical

Manual, and Work Instructions. If you do not understand

these

instructions,

or

the

following

applicable warnings and cautions,

contact Sizewise at 1-800-814-9389.

WARNING:

Do not attempt to install, r

epair, or remove

the trapeze,

single pole patient assist, or any other overhead components/devices while bed is
occupied.

WARNING:

Before positioning patient on bed, verify all components are secure

after adjustments, repairs, or servicing of the trapeze, single pole patient assist, or

any other overhead components/devices.

«
...
42
43
44
45
46
...
»

Содержание 33060400








































































Отзывы:

Нет отзывов

Похожие инструкции для 33060400

Бренд: ICS Schneider Messtechnik Страницы: 124

Бренд: Baileigh Industrial Страницы: 40

Бренд: Paia Страницы: 11

Бренд: CAB Страницы: 39

Бренд: CAB Страницы: 27

Бренд: e+p Elektrik Handels Страницы: 2

Бренд: Gaspardo Страницы: 196

Бренд: RAB Страницы: 2

Бренд: K-LASER Страницы: 70

Бренд: K-LASER Страницы: 72

Бренд: M-system Страницы: 5

Бренд: MA Страницы: 2

Бренд: Qiagen Страницы: 48

Бренд: Qiagen Страницы: 162

Бренд: Qazqa Страницы: 4

Бренд: Qlightec Страницы: 12

Бренд: WalkMed Страницы: 2

Бренд: Walinga Страницы: 20

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды