Sizewise 33060400 Скачать руководство пользователя страница 69

Страница: 69 / 71

DISCLAIMER AND RELEASE.

EXCEPT FOR THE EXPRESS WARRANTIES IN THIS LIMITED

PRODUCT WARRANTY, SIZEWISE DISCLAIMS ANY AND ALL OTHER WARRANTIES WHETHER EXPRESS OR

IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, FITNESS FOR

A PARTICULAR PURPOSE OR NON INFRINGEMENT, AND ANY WARRANTIES ARISING FROM COURSE OF DEALING, USAGE OF

TRADE, OPERATION OF LAW OR OTHERWISE WITH RESPECT TO ANY PRODUCT, SERVICES, PARTS INCLUDING REPAIRED OR

REPLACED PRODUCTS AND PARTS. ARE HEREBY DISCLAIMED AND EXCLUDED. Sizewise ALSO HEREBY DISCLAIMS AND

EXCLUDES

ALL OTHER OBLIGATIONS OR LIABILITIES, EXPRESS OR IMPLIED, ARISING BY LAW OR OTHERWISE, WITH

RESPECT TO ANY NONCONFORMANCE OR DEFECT IN ANY PRODUCT OR PART(S), INCLUDING BUT NOT LIMITED TO:

(A) ANY OBLIGATION, LIABILITY, RIGHT, CLAIM OR REMEDY IN TORT, WHETHER OR NOT ARISING FROM THE

NEGLIGENCE OF SIZEWISE OR ITS SUPPLIERS (WHETHER ACTIVE, PASSIVE OR IMPUTED); AND (B) ANY OBLIGATION,

LIABILITY, RIGHT, CLAIM OR REMEDY FOR LOSS OF OR DAMAGE TO ANY PRODUCT OR PART(S). THIS DISCLAIMER AND

RELEASE SHALL APPLY EVEN IF THE EXPRESS WARRANTY SET FORTH ABOVE FAILS OF ITS ESSENTIAL PURPOSE.

Exclusive Remedies.

THESE SHALL BE THE SOLE AND EXCLUSIVE REMEDIES OF THE BUYER FOR ANY BREACH OF WARRANTY.

EXCLUSION OF CONSEQUENTIAL AND INCIDENTAL DAMAGES.
SIZEWISE AND/OR ITS SUPPLIERS SHALL HAVE NO OBLIGATION OR LIABILITY, WHETHER ARISING IN CONTRACT

(INCLUDING WARRANTY), TORT OR ANY OTHER LEGAL THEORY (INCLUDING ACTIVE, PASSIVE, OR IMPUTED

NEGLIGENCE AND STRICT LIABILITY), OR OTHERWISE, FOR DAMAGE TO THE PRODUCT INCLUDING PART(S),

PROPERTY DAMAGE, DEATH, PERSONAL INJURY, LOSS OF USE, GOODWILL, REVENUE OR PROFIT, COST OF CAPITAL,

COST OF SUBSTITUTE PRODUCT, ADDITIONAL COSTS INCURRED BY

BUYER (BY WAY OF CORRECTION OR

OTHERWISE) OR ANY OTHER INCIDENTAL, SPECIAL, INDIRECT, COMPENSATORY OR CONSEQUENTIAL DAMAGES,

INCLUDING WITHOUT LIMITATION WHETHER RESULTING FROM NONDELIVERY, USE, MISUSE OR INABILITY TO USE

THE PRODUCT, SERVICES OR PART(S). THIS EXCLUSION APPLIES EVEN IF THE ABOVE WARRANTY FAILS OF ITS

ESSENTIAL PURPOSES AND REGARDLESS OF WHETHER SUCH DAMAGES ARE SOUGHT FOR BREACH OF WARRANTY,

BREACH OF CONTRACT, NEGLIGENCE, OR STRICT LIABILITY IN TORT OR UNDER ANY OTHER LEGAL THEORY.

SIZEWISE LIABILITY SHALL BE LIMITED TO THE AMOUNT PAID BY BUYER FOR THE RELEVANT PRODUCT. SOME

STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE

ABOVE LIIMITATION AND EXCLUSION ON SUCH MAY NOT APPLY.

EXTENDED WARRANTY

Limited Product Warranty

D-L00-001

Sizewise

Evolution

Bed

Product No. 33060400 35" & 33060450 39"

Limited Product Warranty

Содержание 33060400








































































Результаты поиска

Содержание 33060400

Отзывы:

Похожие инструкции для 33060400

Бренды по названию

Популярные бренды

Sizewise 33060400, Руководство пользователя

Результаты поиска

Содержание 33060400

Отзывы:

Похожие инструкции для 33060400

Бренды по названию

Популярные бренды