Sizewise 33060400 Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 71

background image

41

Features

Casters

Steer Casters

At  the  foot  section  there  are  lock  and  steer  casters.    When
locked  the  bed  can  still  maneuver  but  the  casters  will  not
swivel, this makes them the steering casters.  Press down on
the pedal to lock and lift up on the pedal to unlock.  When
one pedal on the head section caster is pressed or lifted both
head section casters will be activated.

Locking Casters

At the head section there are locking only casters. When locked, the bed cannot be moved.
Press down on the pedal to lock and lift up on the pedal to unlock. When one pedal on the foot
section caster is pressed or lifted, both head section casters will be activated.

WARNING:

While the patient is in the bed, it is recommended to lock the casters

to reduce risk of injury to the patient and/or care provider.

To avoid and reduce risk of a tripping injury to the patient and/or care provider,
align the casters with the bed.

Connection of Electrical Components

Should it become necessary to remove any of the cables from the control box, the diagram below
will assist in finding the appropriate cables.

The diagram also indicates the fuse placement. Use 4 amp time delay fuses if they need to be
replaced.

A. Main Power
B. Ground
C. Battery Back-Up (if

equipped)

D. Hand Control
E. Head Actuator
F. Bed – Head Actuator
G. Bed – Foot Actuator
H. Foot Actuator
I.

Foot Control Box

«
...
40
41
42
43
44
...
»

Содержание 33060400








































































Отзывы:

Нет отзывов

Похожие инструкции для 33060400

Бренд: DAKO Страницы: 25

Бренд: 3M ESPE Страницы: 50

Бренд: VACGEN Страницы: 13

Бренд: Ace Страницы: 17

Бренд: ACE INSTRUMENTS Страницы: 33

Бренд: ACE INSTRUMENTS Страницы: 2

Бренд: ACE INSTRUMENTS Страницы: 2

Бренд: TapFlo Страницы: 35

Бренд: DANA Страницы: 8

Бренд: 2E Страницы: 6

Бренд: Eaton Страницы: 2

Бренд: Eaton Страницы: 20

Бренд: Obdstar Страницы: 42

Бренд: GARANT Страницы: 239

Бренд: p-light Страницы: 36

Бренд: Nabtesco Страницы: 26

Бренд: Nel-Tech Labs Страницы: 8

Бренд: Park House Healthcare Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды