sitrex SR 320/8, Использование и обслуживание

Страница: 21 / 36

21
Gear speed should be limited so that the rake works cleanly and the swath is well
formed
.
6) GENERAL INSTRUCTIONS FOR FIELD USE
Before starting work, familiarize yourself with the following general instructions:
Before using the machine ensure that all safety precautions are taken.
Check that all safety protection and guards are in place and working.
Inspect the work site in order to familiarize yourself with the terrain.
Do not start the tractor before being properly seated in the driving position.
Do not start the machine if it is damaged (or even if you only suspect it is damaged) and inform your
nearest dealer of the problem and ask for assistance.
Do not allow yourself to become distracted when working: give your full attention to the job in hand.
Maintain constant control over the tractor and ensure that you know how to stop quickly and switch
off the engine.
Caution when working on inclines. It is better to work from the bottom to the top of an incline (or from
the top to the bottom), rather than across an incline where there is a risk of overturning. Check and
heed the instructions supplied by the tractor manufacturer, especially those concerning the maximum
incline on which it is possible to work.
It is advisable to reduce speed when working and maneuvering on inclines and only to change speed
and direction gradually. Do not make sudden stops or starts.
Do not work on wet or slippery grass or terrain, or anywhere where grip is poor. If this is unavoidable,
work at a slow speed so as to ensure operator safety.
Always switch off the tractor engine, apply the parking brake and remove the ignition key whenever
you have to attend to the machine to make adjustments or to remove grass and other objects which
might be entangled in the machine.
Before leaving the tractor, disengage the power takeoff, lower the machine until its wheels are on the
ground and put the hydraulic directional control lever into the locked position.
Never go near the rotors until they have completely stopped moving.
Never attempt to make adjustments to the machine while it is running. Always stop the machine
before carrying out any such work. Do not oil the machine when it is running or is connected to the
power takeoff.
Do not use the control levers as handholds since they can move and do not give a secure grip.
Furthermore, any involuntary movement of a control lever can cause unintentional movement of the
tractor or machine
7) TRANSPORT BY ROAD
After the machine has been attached to the tractor as previously described and before transporting it
to or from fields or any other workplace, the following instructions should be heeded:
Before setting off with the machine attached to the tractor, check the local road transport regulations.
During transport keep the machine fully raised with the power takeoff disengaged and the lifting unit
immobilized.
Check that all guards, safety protection and locking split pins are in place, functioning and correctly
fitted.
Ensure that nobody leans against, or climbs on to, the machine during transport. The machine is an
agricultural machine
NOT designed for transporting persons or goods . Consult the tractor
maintenance and-use manual where necessary. Maintain constant control over the vehicle and
ensure that you know how to stop the tractor quickly and switch off the engine.
When on a public road, observe all Highway Code regulations. Drive near the edge of the road and
try not to obstruct traffic.
Do not park the tractor and/or the machine where it might obstruct, or be a danger to, any public right
of way. Avoid going onto a public road if the tractor or machine is very dirty - you could leave a trail of
soil, grass and other matter which could dirty the road and obstruct normal traffic.