sitrex MK14 MY15, Сборка

Страница: 30 / 38

30
32) DANGER
Send hose 11 under bracket A and continue to secure it with collars 3 and screws 4.
Apply washer 6 and nipple 5 to hole B on the flow divider. Bring the female end of
hose 2 near the nipple and extend it along drawbar C toward the front of the machine
parallel to hose 1 already assembled. Connect the female end of hose 2 to the nipple 5
without fastening completely.
Note: Before fully fastening all the hoses, make sure that the line of the hose from one
end to the other is not twisted and/or does not have sharp bends or kinks that cause it to
be crushed or to have an unpleasant appearance.
Now secure hoses 1-2 using collars 7, clamp 8 and bolts 9. Hoses 1-2-11 will also be in
the following steps.
In this step, you will use:
Item 1: see preceding step
Item 2: 1 hose, ½”, length 7750mm (305.12”)
Item 3: 4 collars ø18 (ø0.71”)
Item 4: 4 cheese head screws M6x25 (0.24”x1”
Item 5: 1 nipple 3/8”-7/8” JIC
Item 6: 1 washer ø3/8”
Item 7: 2 double collars ø22 (ø0.87”)
Item 8: 1 clamp ø22 (ø0.87”)
Item 9: 1 bolt M8x45 (0.31”x1.77”)
Item 11: see preceding step