3-28
Setting Internet Access Time Restrictions
For cost, security and efficiency reasons, you may want to adjust the times when the
Wireless Router will be allowed to automatically connect to the Internet. A simple
setup screen is used to enter the days of the week and the hours of the day during
which Internet access is allowed. The Wireless Router will not connect to the Internet
outside of the configured times.
In order for this feature to be effective, the Wireless Router must be configured for
the current local time. To do this, see the section, “Setting the System Time” , above.
Note, however, that if for some reason the Wireless Router is reset or power-cycled,
the previous time setting will be lost. Until you once again set the time, the Wireless
Router will either allow Internet access or not, depending upon a setting which is
configured below.
To view or change Internet access time restriction settings, select
Internet Access
Time
from the menu:
Configuration - Internet Access Time
The following screen is displayed:
Step 1
Set the days of the week during which Internet access is allowed. Select
Day Range
if you want to specify a range of days.
If you select
All
,
Internet access will be allowed every day.
Step 2
Set the time during which Internet access will be allowed. Not that this
setting is based upon a 24 hour clock. Select
Time Range
to enter a
consecutive period of time between which Internet access is allowed. If
you select
All
, Internet access will be allowed from midnight to midnight
on the days selected in
Step 1.
Step 3
Enter the default setting for Internet access if the router is power-cycled or
reset. If you enter “Yes” (the default), then Internet access will be allowed
unconditionally until the clock is set. If you enter “No”, then Internet
access will not be allowed until the clock is set.
Step 4
Click
Apply
to enable your settings.
Содержание Wireless Router
Страница 1: ...Wireless Router User Guide ...
