3-22
may be selected in any individual profile.
Set as IP Default Route (e.g., for Internet Access)
: select
Yes
if you
want users on your local LAN to get their Internet access through a
connection to the remote LAN or if this connection is to be used to locate
an IP resource not otherwise defined in the IP Routing Table. If
Yes
is
selected, the
Remote IP Address
and
Netmask
fields do not appear.
Note:
If you allow Internet access in this manner, make sure you do not have
any Internet Access configuration profiles set up on the Wireless Router.
Remote IP Address
: the IP address of a destination computer on a
network reachable through this connection.
Remote IP Netmask
: the IP subnet mask of the Remote IP Address
Enable IPX
: select Yes to allow IPX routing over a connection using this
profile
IPX RIP/SAP
: enable or disable IPX Routing Information Protocol and
Service Advertising Protocol.
Set as IPX Default Route
: if this parameter is set to
Yes
, then the
Wireless Router uses this connection if no other route for an IPX packet
can be found in the routing table.
Remote IPX Network Number
: the IPX network number of a network
reachable through this connection. If you set this connection as the default
IPX route, an entry in this field is not required.
Enable Bridging:
select
Enable
to bridge other protocols, for example,
SNA, Appletalk, and NetBEUI.
Deleting or Modifying Remote Office Access
Profiles
To delete or modify a Connection Profile:
Step 1
Select
Connection Profiles
from the ARM menu.
Configuration - Connection Profiles
The following screen appears.
Step 2
Highlight the entry in the list you want to delete or modify, and click
DELETE
to delete the profile or click
NEXT
to modify the profile.
Содержание Wireless Router
Страница 1: ...Wireless Router User Guide ...
