Sitecom N600 X5 Скачать руководство пользователя страница 29

Страница: 29 / 123

Although most of the VPN servers will give you an IP address dynamically,

some VPN servers must be configured statically. If you want to configure your

IP address dynamically, please skip this step. If you want to configure the VPN

statically, click on “Use the following IP address”. Next, fill in the information

provided from your VPN service regarding:

IP address.

This is the IP address that the VPN service has assigned to

you.

Subnet mask

. If you are configuring your IP address statically, your VPN

service should have provided you with a subnet mask value along with

your IP address.

Default Gateway

If connected statically, this value is also provided from

your VPN service to route packets properly to the VPN server.

Fill in the Login information to connect to the VPN service. VPN servers

use this information for user authentication. Please fill in the following

information:

Содержание N600 X5




























































































































Результаты поиска

Содержание N600 X5

Отзывы:

Sitecom N600 X5, Руководство пользователя, Страница: 29 / 123

Результаты поиска

Содержание N600 X5

Отзывы: